Consultation hotline:
 Consultation hotline:138-2927-6169
News Center
Your location: Home>>News Center

How to use the shock absorber of CNC machining center?

source: time:2019-10-23 09:11:27

CNC machining center solves the problem of complex, precise, small batch and multi variety parts processing. It is a flexible and efficient automatic machine tool, which represents the development direction of modern machine control technology and a typical mechatronic product.

CNC machining center has higher machining accuracy (accuracy) and very stable machining quality (explanation: stable and stable; no change) compared with ordinary machine tools. CNC machining generally refers to computer digital control precision machining, CNC machining lathe, CNC machining milling machine, CNC machining boring milling machine, etc. The feed path of finish machining is basically carried out along the contour sequence of its parts. Therefore, the key work of determining the feed path is to determine the feed path of rough machining and empty stroke. Therefore, for operators with high quality requirements, especially in terms of shock absorption devices, the following methods should be paid attention to:

1. After the machine tool is horizontal, screw the screw flat and fix the horizontal state.

2. Put the required sizing block under the foundation hole of the machine tool, thread the screw into it, clamp the foundation with the nut, and place the nut in contact with the machine tool. NC machining is a process method of machining parts on NC machine tools. The process procedures of NC machine tools and traditional machine tools are generally consistent, but there are also obvious changes. The machining method of controlling the displacement of parts and tools with digital information. It is an effective way to solve the problems of variable parts, small batch, complex shape, high precision and to realize high efficiency and automatic machining.

3. Due to the creep of rubber, the level of machine tool shall be adjusted two weeks later when the sizing block is used for the first time.

4. Adjust the level of the machine tool, rotate the nut anticlockwise, and the machine tool will rise. In NC machining, the control system sends out instructions to make the cutter move in a variety of required movements, and to represent the shape and size of the workpiece in the form of numbers and letters and other technical requirements and machining process requirements. It generally refers to the process of machining parts on CNC machine tools. In order to improve the degree of production automation, shorten the programming time and reduce the cost of NC machining, a series of advanced NC machining technologies have been developed and used in the aerospace industry.

It is very important to use the shock absorber of CNC machining center correctly. Therefore, the above four methods should be firmly grasped.